1 4

globalsautoparts.com

Honda 94109-12000 Genuine Drain Plug Washers

Honda 94109-12000 Genuine Drain Plug Washers

$15.94 USD
$15.94 USD
Sale Sold out
Taxes included. Shipping calculated at checkout.

 

✔ Honda 94109-12000 Drain Plug Washers — Genuine OEM Part (12mm, Qty 10)
✔ Fitment: 12mm drain plug washers for Honda engines, transmissions, and select other applications
✔ Direct replacement for factory crush washers — no modifications required
✔ Manufactured to Honda's original specifications and tolerances
✔ 12mm copper crush washers — single‑use sealing gaskets
✔ Pack of 10 washers — convenient bulk supply for multiple services

 

Honda 94109-12000 Genuine Drain Plug Washers — 12mm Copper Crush Washers (Pack of 10)

A leaking drain plug, fluid stains under the vehicle, or a low fluid level warning — these are common signs that your drain plug washer needs replacement. The crush washer is a single‑use sealing gasket that compresses to form a leak‑tight seal between the drain plug and the housing. Reusing an old washer can cause fluid leaks, which may lead to low fluid levels and potential component damage. Replacing it with this genuine Honda washer ensures a proper seal and protects your engine or transmission.

This is a factory‑original Honda drain plug washer (OE part number 94109-12000) with a 12mm inner diameter, specifically designed for drain plugs on Honda engines and transmissions. It is made from high‑quality copper material that compresses evenly under torque to create a reliable, long‑lasting seal. This listing includes a pack of 10 washers, offering a convenient supply for multiple fluid changes. This is the same washer sold at Honda dealerships.

 

When to Replace


When to Replace (Common Symptoms)
• The washer is flattened, cracked, or damaged
• Fluid is leaking from the drain plug
• Fluid stains visible under the vehicle
• The old washer has been reused (must be replaced)
• You are performing a fluid change and need a new washer
• The drain plug is loose or difficult to tighten due to a worn washer

Product Details & Highlights


Product Highlights
• ✔ Genuine Honda OEM — not an aftermarket or Chinese replica
• ✔ 12mm inner diameter — fits standard Honda 12mm drain plugs
• ✔ Single‑use copper crush washer — ensures leak‑tight sealing every time
• ✔ Pack of 10 washers — great value for multiple fluid changes
• ✔ Manufactured to Honda’s strict quality standards
• ✔ Backed by Honda’s manufacturer warranty (valid through any authorized dealer)

Package Contents


Package Contents
• 10 × Honda 94109-12000 crush washers (genuine)

FAQ

FAQ

Is this a genuine Honda part or a copy?
This is 100% genuine Honda OEM — in original factory packaging with Honda part number printed on the label. It is not an aftermarket brand or a replica.

Will these washers fit my 2010 Honda Civic?
Yes — the 2010 Civic with the 12mm drain plug uses this washer. We recommend verifying with your VIN.

Will these washers fit my 2005 Honda Accord?
Yes — the 2005 Accord uses the 12mm washer for the engine or transmission drain plug. Please verify your application.

Can I reuse the old washer?
No — this is a crush washer designed for one‑time use only. Reusing an old washer will cause leaks. Always use a new washer when you remove the drain plug.

How many washers are in the pack?
This listing includes a pack of 10 washers.

What is the torque spec for the drain plug?
The typical torque spec for the drain plug is 30–40 Nm. Always refer to your vehicle's service manual for the exact specification.

Are these washers the same as the 14mm washers?
No — 14mm washers (94109-14000) are for larger drain plugs. This washer is specifically 12mm.

Can I use this washer for transmission drain plugs?
Yes — this washer is used on many Honda transmission drain plugs. Please verify the plug size on your transmission.

What is the correct installation procedure?
Place the new washer onto the drain plug, then thread the plug into the housing. Tighten to the specified torque from your service manual. The washer will compress and form a seal as the plug is tightened.

Will these washers fit my Acura TSX?
Yes — many Acura models use the same 12mm washers. Please verify with your VIN.

Can I use these washers for other 12mm plugs?
Yes — these washers can be used on any 12mm drain plug that requires a copper crush washer, provided the plug and housing are designed for this washer.

How do I dispose of used washers?
Used copper washers can be recycled as scrap metal. Please check your local recycling guidelines.

Does this washer fit the Honda Odyssey?
Yes — the Odyssey uses this 12mm washer on select engine and transmission drain plugs. Please verify your application.

Does this washer fit the Honda Pilot?
Yes — the Pilot uses this 12mm washer. Please verify with your VIN.

Does this washer fit the Honda CR-V?
Yes — the CR-V uses this 12mm washer. Please verify with your VIN.

Does this washer fit the Honda Element?
Yes — the Element uses this 12mm washer. Please verify with your VIN.

Does this washer fit the Honda HR-V?
Yes — the HR-V uses this 12mm washer. Please verify with your VIN.

Does this washer fit the 1999 Honda Accord?
Yes — the 1999 Accord uses this 12mm washer. Please verify with your VIN.

Does this washer fit the 2008 Honda Civic?
Yes — the 2008 Civic uses this 12mm washer. Please verify with your VIN.

Does this washer fit the 2013 Honda CR-V?
Yes — the 2013 CR-V uses this 12mm washer. Please verify with your VIN.

Does this washer fit the 2017 Honda Odyssey?
Yes — the 2017 Odyssey uses this 12mm washer. Please verify with your VIN.

View full details