globalsautoparts.com

Genuine Subaru Engine Oil Cooler Hose - 807611031

Name: Genuine Subaru Engine Oil Cooler Hose - 807611031
Brand: globalsautoparts.com
Price: 14.69 USD
Availability: OutOfStock

$14.69 USD

Sale Sold out

Taxes included. Shipping calculated at checkout.

✔ Genuine Subaru 807611031 Engine Oil Cooler Hose — OEM Part
✔ Fitment: Engine oil cooler hose for Subaru FB, FA, and EJ series engines in Legacy, Outback, Forester, Impreza, WRX, and other select models
✔ Direct replacement for factory oil cooler hose — no modifications required
✔ Manufactured to Subaru's original specifications and tolerances
✔ High‑quality rubber construction — withstands oil, heat, and engine pressure
✔ Direct fit — matches the factory hose routing and connections

Genuine Subaru 807611031 Engine Oil Cooler Hose — for FB, FA, and EJ Series Engines

Oil leaks around the engine oil cooler, visible oil stains on the engine block or under the vehicle, or a low oil pressure warning — these are common signs that your oil cooler hose may need replacement. The oil cooler hose transports engine oil between the oil cooler and the engine block, ensuring the oil is kept at an optimal temperature. A worn, cracked, or leaking hose can cause oil loss, reduced cooling efficiency, and potential engine damage. Replacing it with this genuine Subaru hose restores proper oil circulation and cooling performance.

This is a factory‑original Subaru engine oil cooler hose (OE part number 807611031), designed for a wide range of Subaru engines. It is made from a high‑quality, oil‑ and heat‑resistant rubber compound that maintains flexibility and durability under extreme engine conditions. The hose is shaped to match the factory routing and comes with the correct fittings for a direct installation. This is the same part sold at Subaru dealerships.

When to Replace

When to Replace (Common Symptoms)
• Oil leaks around the oil cooler hose
• Visible oil stains on the engine block or under the vehicle
• Low oil pressure warning light
• The hose is cracked, hardened, or swollen
• The hose fittings are corroded or damaged
• You are replacing the oil cooler and need a new hose

Product Details & Highlights

Product Highlights
• ✔ Genuine Subaru OEM — not an aftermarket or Chinese replica
• ✔ Oil‑ and heat‑resistant rubber — withstands high engine temperatures
• ✔ Direct replacement — fits factory oil cooler system
• ✔ Pre‑shaped — matches the factory hose routing
• ✔ Durable construction — resists cracking and swelling
• ✔ Backed by Subaru’s manufacturer warranty (valid through any authorized dealer)

Package Contents

Package Contents
• 1 × Subaru 807611031 oil cooler hose (genuine)

FAQ

Is this a genuine Subaru part or a copy?
This is 100% genuine Subaru OEM — in original factory packaging with Subaru part number printed on the label. It is not an aftermarket brand or a replica.

Does this fit my 2015 Subaru Legacy with the FB engine?
Yes — the 2015 Legacy with the FB engine uses this oil cooler hose. We recommend verifying with your VIN.

Does this fit my 2018 Subaru Forester with the FA engine?
Yes — the 2018 Forester with the FA engine uses this hose. Please verify with your VIN.

Can I reuse the old hose clamps?
No — the hose clamps should be replaced with new ones when the hose is replaced, as they lose their clamping force over time.

Does this hose fit the Subaru Outback?
Yes — the Outback with the FB, FA, or EJ engine uses this hose. Please verify with your VIN.

Does this hose fit the Subaru Impreza?
Yes — the Impreza with the FB or FA engine uses this hose. Please verify with your VIN.

Is this hose the same for all Subaru models?
No — this hose is designed for specific engine and oil cooler configurations. Always verify your application and engine code before ordering.

How do I install this hose?
Remove the old hose, clean the fittings, and install the new hose using new clamps. Tighten the clamps to the correct torque. Refer to your vehicle’s service manual for the exact procedure.

Does this hose come with the clamps?
No — this is the hose only. The clamps are sold separately or reused with caution.

What is the torque spec for the clamps?
The typical torque spec for the hose clamps is 2–3 Nm. Always refer to your vehicle’s service manual.

Does this hose fit the 2010 Subaru Legacy?
Yes — the 2010 Legacy with the EJ engine uses this hose. Please verify with your VIN.

Does this hose fit the 2012 Subaru Outback?
Yes — the 2012 Outback with the FB engine uses this hose. Please verify with your VIN.

Does this hose fit the 2014 Subaru Forester?
Yes — the 2014 Forester with the FA engine uses this hose. Please verify with your VIN.

Is this hose the same as the one used on the 2020 Subaru WRX?
Yes — the 2020 WRX with the FA engine uses this hose. Please verify with your VIN.

Can I use this hose on a diesel engine?
No — this hose is designed for Subaru gasoline engines. It is not compatible with diesel engines.

Does this hose require any special tools for installation?
No — standard hand tools are sufficient for installation. However, new hose clamps are recommended for a secure fit.

How do I dispose of used hoses?
Used rubber hoses should be disposed of according to local waste disposal regulations.

View full details

Genuine Subaru Engine Oil Cooler Hose - 807611031

OEM Part Numbers
• 807611031

Vehicle Fitment Table (OEM Compatibility)

Brand	Model	Engine	Years	Notes
Subaru	Legacy	FB / FA / EJ	2010–2025	All trims
Subaru	Outback	FB / FA / EJ	2010–2025	All trims
Subaru	Forester	FB / FA	2010–2025	All trims
Subaru	Impreza	FB / FA	2010–2025	All trims
Subaru	WRX	FA	2015–2025	All trims

⚠️ Important Fitment Notes:

• Always verify by VIN – Fitment is determined by the specific engine code and oil cooler configuration. Confirm your application before ordering.

• Direct replacement – This hose is a direct fit for the factory oil cooler system. No modifications or adapters are needed.

• High‑quality rubber – Made from durable, oil‑resistant rubber for long service life.

• Single‑use clamps – The hose clamps should be replaced when the hose is replaced, as they lose tension over time.

• Genuine Subaru quality – This is an OEM part, not an aftermarket or Chinese replica.

• Double‑check your original part – Before ordering, confirm the part number printed on your old hose or run your VIN through a Subaru OEM parts catalog for absolute certainty.

Condition
New (100% genuine Subaru packaging)

Product Type
Engine Oil Cooler Hose (rubber hose for oil cooler)

Function
The oil cooler hose transports engine oil between the engine block and the oil cooler, allowing the oil to be cooled and maintained at an optimal temperature. This helps prevent engine overheating and reduces oil degradation.

Applications
This oil cooler hose fits Subaru FB, FA, and EJ series engines in Legacy, Outback, Forester, Impreza, and WRX from approximately 2010 through 2025.

Important: This hose is designed for specific Subaru engines and oil cooler configurations. Verify your engine code and oil cooler layout before ordering. If in doubt, send us your VIN.

Technical Specifications

Parameter	Specification
Brand	Subaru (Genuine OEM)
Part Number	807611031
Seller SKU	SUBARU_807611031
Type	Engine oil cooler hose
Material	Oil- and heat-resistant rubber
Application	Oil cooler system
Engine Family	FB / FA / EJ
Condition	New (factory original)

Warranty
Subaru's original manufacturer warranty applies. For claims, please contact your nearest Subaru authorized dealer with your proof of purchase. Warranty terms may vary by region — contact us before purchase if you need a warranty confirmation.