Dayco

Dayco 89006 Idler & Tensioner Pulley

Dayco 89006 Idler & Tensioner Pulley

$24.12

✔ Dayco 89006 Idler & Tensioner Pulley — Steel, 90mm Diameter, Flat Serpentine, Lifetime-Lubricated Bearing
✔ Compatibility: Broad coverage including select 1988–1995 GM 6.2L/6.5L Diesel, 2008–2010 Ford 6.4L Powerstroke, and various Chevrolet/GMC/Chrysler/Plymouth applications — verify by VIN before ordering
✔ Flat, flangeless steel pulley — 90mm (3.54") diameter, 30mm width
✔ Lifetime-lubricated ball bearing with double high-temperature seals — peak bearing performance
✔ E-coating comparable to OE plating — resists corrosion and wear
✔ Meets or exceeds OE quality — smoother surfaces and tighter tolerances reduce vibration and extend belt life
✔ Made by Dayco — trusted OEM supplier

 

Dayco 89006 Idler & Tensioner Pulley — Steel, 90mm Flat Serpentine

A failing idler pulley announces itself through chirps, squeals, or a wobble you can feel through the belt. Left alone, it can seize and take the serpentine belt with it, leaving you stranded. The Dayco 89006 is a flat steel idler/tensioner pulley built to OE standards, with lifetime-lubricated bearings and double high-temperature seals that keep it spinning smoothly through heat cycles and high mileage. For the many GM, Ford, and Chrysler applications it covers, it is a direct-fit replacement that restores proper belt tension and alignment.

This is a Dayco idler/tensioner pulley, part number 89006. It features a flat, flangeless steel pulley design with a 90mm diameter and 30mm width . The pulley uses a single lifetime-lubricated ball bearing with a 17mm inner diameter and 12mm bearing width . Double high-temperature seals protect the bearing, which Dayco identifies as the most critical element of a pulley's service life . The steel construction includes an e-coating comparable to OE plating for corrosion resistance .

When to Replace

• Chirping, squealing, or grinding noise from the accessory drive
• Visible wobble or misalignment of the pulley
• Belt fraying or uneven wear on one side
• Bearing roughness when spinning the pulley by hand
• Belt replacement interval reached — pulley replacement recommended as preventive maintenance

Product Details & Highlights

• ✔ Flat, flangeless steel pulley — 90mm diameter, 30mm width
• ✔ Lifetime-lubricated ball bearing — 17mm inner diameter, 12mm width
• ✔ Double high-temperature seals — protect bearing performance
• ✔ E-coating comparable to OE plating — corrosion and wear resistance
• ✔ Tighter dimensional tolerances — less vibration, longer belt life
• ✔ Meets or exceeds OE quality

Package Contents

• 1 × Dayco 89006 Idler/Tensioner Pulley

FAQ

FAQ

Is this a genuine Dayco product?
Yes — this is the Dayco 89006 idler/tensioner pulley, manufactured by Dayco .

Will this fit my 2009 Ford F-250 6.4L Powerstroke?
The 2008–2010 Ford F-250/350/450/550 with the 6.4L Powerstroke is listed as a compatible application for the air conditioning idler position . Confirm by VIN before ordering.

Is this pulley flat or ribbed?
It is a flat, flangeless pulley designed to run on the smooth back side of a serpentine belt .

What are the dimensions?
90mm diameter, 30mm width, 17mm bearing inner diameter, 12mm bearing width .

Does it come with a bolt?
No — the listing is for the pulley only. Reuse the existing OE bolt and washer during installation .

How often should idler pulleys be replaced?
Dayco recommends replacing idler pulleys every second time the belts are replaced . Inspect for noise or roughness during belt service.

Can I install this myself?
Yes — idler pulley replacement is typically a straightforward procedure. Release belt tension, remove the mounting bolt, swap the pulley, and reinstall. Consult your vehicle's service information for the exact procedure and torque specification.

California Proposition 65

WARNING

Cancer and Reproductive Harm.

www.p65warnings.ca.gov

View full details