Dayco

Dayco 5060410 Poly Rib Serpentine Belt

Dayco 5060410 Poly Rib Serpentine Belt

$23.97

✔ Dayco 5060410 Poly Rib Serpentine Belt — 6-Rib, 41.00" Effective Length, EPDM & Aramid Reinforced
✔ Compatibility: Select 1990–2008 vehicles including Toyota (Camry, Sienna, Highlander, Avalon, Solara), Lexus (RX300, ES300, ES330), Honda (Prelude), Dodge/Chrysler/Plymouth minivans, and select Freightliner/International/Volvo heavy-duty applications — verify by VIN before ordering
✔ 6-rib K-section design — 41.00" (1041.40 mm) effective length, 0.82" top width
✔ EPDM construction with aramid reinforcement — heat-resistant and durable for high-mileage drives
✔ Patented W-profile rib design — enhances flexibility and reduces noise
✔ Meets SAE J1459 and SAE J2432 standards
✔ Made in USA — Dayco Poly Rib series

 

Dayco 5060410 Poly Rib Serpentine Belt — 6-Rib, 41.00" Effective Length

A worn serpentine belt can leave you stranded with a dead battery, no power steering, or an overheating engine. The Dayco 5060410 Poly Rib belt is engineered for multiple-accessory drives that demand durability and consistent power transmission. With its aramid-reinforced EPDM construction and patented W-profile ribs, it delivers the flexibility and heat resistance needed for high-mileage applications across a wide range of domestic, import, and heavy-duty vehicles.

This is a Dayco Poly Rib serpentine belt, part number 5060410. It features a 6-rib K-section design with an effective length of 41.00 inches (1041.40 mm) and a top width of 0.82 inches . The belt is constructed from EPDM rubber with aramid reinforcement, providing resistance to heat and flex fatigue . The patented W-profile rib design enhances tip flexibility and reduces noise during operation . It meets SAE J1459 and SAE J2432 standards and is manufactured in the USA .

When to Replace

• Visible cracks, fraying, or glazing on the belt ribs
• Squealing or chirping noises from the accessory drive
• Slipping power steering or alternator performance
• Belt has exceeded recommended service interval
• Tensioner or pulley replacement requires belt removal — replacement recommended

Product Details & Highlights

• ✔ 6-rib K-section design — 41.00" (1041.40 mm) effective length, 0.82" top width
• ✔ EPDM construction with aramid reinforcement — heat-resistant and durable
• ✔ Patented W-profile ribs — enhances flexibility and reduces noise
• ✔ Meets SAE J1459 and SAE J2432 standards
• ✔ Made in USA
• ✔ Broad application coverage — domestic, import, and heavy-duty vehicles

Package Contents

• 1 × Dayco 5060410 Poly Rib Serpentine Belt

FAQ

FAQ

Is this a genuine Dayco product?
Yes — this is the Dayco Poly Rib 5060410 serpentine belt, manufactured by Dayco .

Will this fit my 2003 Toyota Sienna?
The 2003 Sienna is listed as compatible in reference fitment data . Confirm by VIN or contact the seller with your vehicle details before ordering.

What is the difference between effective length and outside circumference?
Effective length (41.00") is the working length of the belt as it runs around the pulleys. Outside circumference (41.66") includes the additional material at the belt's outer edge .

Does this belt have 6 ribs?
Yes — the 5060410 is a 6-rib belt, also identified by the industry number 6PK1040 .

Is this belt suitable for heavy-duty trucks?
Dayco lists this part for select Freightliner, International, and Volvo heavy-duty applications . However, commercial vehicle fitment should always be verified by engine serial number and belt routing diagram.

Can I install this myself?
Serpentine belt replacement is a common DIY procedure on many vehicles, though access and tensioner design vary. A serpentine belt tool or breaker bar is often required to release tension. Consult your vehicle's service information for the routing diagram and tensioner specifications.

California Proposition 65

WARNING

Cancer and Reproductive Harm.

www.p65warnings.ca.gov

View full details